Branch Indicator

  • You are here: S&P International

Languages

Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P Resin 230 HP

S&P Resin 230 HP

Epoxy based mortar

S&P Resin 230 HP levelling mortar is a solvent-free, thixotropic, grey 3-component epoxy based mortar with an inert quartz sand filler component. It is a class R3 mortar.


 

Call to Action

Pin status

This page is not pinned. Pin this.

Features

  • Thixotropic, enables application of thick layers
  • Hardens with minimum shrinkage
  • Solvent-free
  • High mechanical strength
  • Stickiness-free hardening, even when there is high air humidity
  • Rapid strength developing
  • Convenient pot life

 

Application

  • To level out uneven surfaces
  • Material characteristics of the fresh and hardened adhesive are designed specifically to satisfy the special requirements of the S&P structural component reinforcement system

 

Image Gallery

Call to Action

Pin status

This page is not pinned. Pin this.

Service

Contact person

Technical Data Sheets

Safety Data Sheets

Country specific Product Information

We provide country specific product information on our branches websites. See this product on:

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • Delivery
      Units of 30 kg
    • Storage
      Comp. A + B: at +10 °C to +30 °C, 24 months
      Comp. F (filler): can be stored indefinitely when kept dry
    • Item numberArticlePackaging unit / weightDimension
      LARES23030S&P Resin 230 (Unit of 30 kg)1 unit = 31.50 kg H x Ø = 0.45 m x 0.25 m

Safety Data

  • For detailed safety information it is recommended to seek advice in the current safety data sheet.

     

Application Instructions

  • Mixing

    Stir the individual components separately and then add component A to component B. Mix thoroughly until the colour is uniformly grey and free of any streaks. Pour the mixed material in a different container in order to reveal any inadequacies in the mix. Mix slowly to minimise air entrapment. Add filling component F and mix slowly until the consistency of the mortar is homogenous. The amount of added filler (comp. F) can be varied in order to adjust the consistency of the mortar to fit different uses and requirements.

    Application

    Apply S&P Resin 230 HP using a spatula within the pot life until the required layer of thickness is obtained. Maximum layer thickness: 50 mm.
    Substrate temperature must be at least 3° C above dewpoint temperature.

You are here

    Contact

    Legal info

    Legal info

    • About Simpson Strong-Tie®

      Since 2012 S&P has been part of Simpson Strong-Tie, an international building products company based in California with multiple locations across Europe.

      The company is committed to helping customers succeed by providing exceptional code-listed products, full-service engineering and field support, product testing and training, and on-time product delivery.

    SIMPSON Strong-Tie

    Meta Navigation en-EU