
S&P Asphalt reinforcement
Fibre reinforcement grids for asphalt surfaces
S&P Tecnogrout-K is based on mineral products, is ready to use and can be applied by trowel or spatula for use in concrete repair, reinforcement, restoration and refurbishment.
Due to the product's high adherence, installation is possible onto any surface, e.g. concrete, ceramic, stone etc. Also, the water tight properties of the product protect the substrate from various forms of attack.
We provide country specific product information on our branches websites. See this product on:
We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.
For detailed safety information it is recommended to seek advice in the current safety data sheet.
Substrate preparation:
Mechanically abrade concrete surface to completely remove debris and loose particles. Wet the surface until complete saturation is achieved and allow standing water to either evaporate or be absorbed into the substrate. Alternatively, remove standing water using a sponge.
Mixing:
Mix the grout either by hand or in a concrete mixer, adding 12-14 % of water (3-3.5 litres per 25 kg bag). Mix until completely lump-free, ensuring that a homogenous mix is achieved.
Application:
Apply the grout by means of trowel or spatula, or alternatively pouring the grout onto the concrete substrate. Finish the surface to the required roughness grade. In case a bonding agent is required, it is recommended to consult to our Technical department.
Curing:
Once the grout is installed, surfaces must be kept damp for at least 10-12 hours, in order to prevent superficial dehydration of the cement.