Related System
S&P G-Sheet E 90/10 B - S&P G-Sheet AR 90/10 B
S&P G-Sheet E 90/10 B - S&P G-Sheet AR 90/10 B
S&P G-Sheet 90/10 is a bidirectional glass fibre fabric with high strength for structural reinforcement. It can be applied in a dry or wet lay-up process. S&P G-Sheets are applied (stuck-on) to the building element in question using laminating resin (S&P Resin 55 HP or S&P Resicem HP).
Call to Action
Features
- Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
- Low self-weight and small installation thickness
- Easy, flexible, and economical strengthening method
- No corrosion
- Very short interruption in the normal use of the building
- No noise and no vibration during installation
Application
- Strengthening or reinforcement of bearing structures made from reinforced concrete and masonry, against flexural (bending tensile) and axial stresses
- Increasing strength and ductility of columns and walls
- Increasing resistance to an earthquake
- Increasing imposed loads
- Replacement of corroded or missing reinforcement
- In case of a change in the nature of imposed loads
- Correction of design and/or building mistakes
- Extension of service life and durability
- Complying with the latest standards
Call to Action
Related Products
Service
Contact person
Documentation
-
Technical Data Sheet S&P G-Sheet E/AR 90/10 B
-
Safety Data Sheet S&P G-Sheet E/AR 90/10 Type B
Installation Instructions
Brochure
-
Flyer S&P FRP Systems
Design guideline
-
Basics for S&P FRP-Systems
Country specific Product Information
We provide country specific product information on our branches websites. See this product on:
Data Area
Product Information
We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.
Logistic Data
-
Delivery S&P G-Sheet E 90/10 B (880 g/m²) S&P G-Sheet AR 90/10 B (880 g/m²) Widht of roll: 670 mm 670 mm Length of roll: 50 m 50 m (special sheets upon request) Storage Storage temperature between +5 °C and +35 °C. Store in a dry place and protect from direct sunlight. Item number Article GSE09010B67 S&P G-Sheet E 90/10 Typ B GSAR9010B67 S&P G-Sheet AR 90/10 Typ B
Safety Data
-
For detailed safety information it is recommended to seek advice in the current safety data sheet.
Installation Instructions
-
Cut sheets with scissors or knife and ruler. Never bend the sheets! (Sheet may only be folded parallel to the fibre). The S&P G-Sheet can be applied in a dry or wet lay-up process.
For details please refer to the application manual for S&P G-Sheet E/AR.