Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P G-Sheet E 90/10 A - S&P G-Sheet AR 90/10 A

S&P G-Sheet E 90/10 A - S&P G-Sheet AR 90/10 A

For uni-directional loads

S&P G-Sheet 90/10 is a bidirectional glass fibre fabric with high strength for structural reinforcement. It can be applied in a dry or wet lay-up process. S&P G-Sheets are applied (stuck-on) to the building element in question using laminating resin (S&P Resin 55 HP or S&P Resicem HP).

S&P G-Sheet E 90/10 A, S&P G-Sheet AR 90/10 A

Call to Action

Pin status

This page is not pinned. Pin this.


  • Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Low self-weight and small installation thickness
  • Easy, flexible and economical strengthening method
  • No corrosion
  • Very short interruption in normal use of the building
  • No noise and no vibration during installation


  • Strengthening or reinforcement of bearing structures made from reinforced concrete and masonry, against flexural (bending tensile) and axial stresses
  • Increasing strength and ductility of columns and walls
  • Increasing resistance against earthquakes
  • Increasing imposed loads
  • Replacement of corroded or missing reinforcement
  • In case of a change in the nature of imposed loads
  • Correction of design and/or building mistakes
  • Extension of service life and durability
  • Complying with the latest standards


Call to Action

Pin status

This page is not pinned. Pin this.


Contact person

Technical Data Sheets

Safety Data Sheets


Country specific Product Information

We provide country specific product information on our branches websites. See this product on:

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • DeliveryS&P G-Sheet E 90/10 A (440 g/m²)S&P G-Sheet AR 90/10 A (440 g/m²)
      Width of roll:670 mm670 mm
      Length of roll:50 m50 m
      (special sheets upon request)
    • Storage
      Storage temperature between +5 °C and +35 °C. Store in a dry place and protect from direct sunlight.
    • Item numberArticle
      GSE09010A67S&P G-Sheet E 90/10 A
      GSAR9010A67S&P G-Sheet AR 90/10 A

Application Instructions

  • Cut sheets with scissors or a knife and ruler. Never bend the sheets! (Sheet may only be folded parallel to the fibre). The S&P G-Sheets can be applied in a dry or wet lay-up process.

    For more details please refer to the application manual of S&P G-Sheet E/AR.

You are here


    Legal info

    Legal info

    • About Simpson Strong-Tie®

      Since 2012 S&P has been part of Simpson Strong-Tie, an international building products company based in California with multiple locations across Europe.

      The company is committed to helping customers succeed by providing exceptional code-listed products, full-service engineering and field support, product testing and training, and on-time product delivery.

    SIMPSON Strong-Tie

    Meta Navigation en-EU