Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P G-Sheet E 50/50 - S&P G-Sheet AR 50/50

S&P G-Sheet E 50/50 - S&P G-Sheet AR 50/50

For bi-directional loads

S&P G-Sheet 50/50 is a bidirectional glass fibre fabric with high strength for structural reinforcement. It can be applied in a dry or wet lay-up process. S&P G-Sheets is applied (stuck-on) to the building element in question using laminating resin (S&P Resin 55 HP or S&P Resicem HP).

S&P G-Sheet E/AR 50/50

Call to Action

Pin status

This page is not pinned. Pin this.


  • Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Low self-weight and small installation thickness
  • Easy, flexible and economical strengthening method
  • No corrosion
  • Very short interruption in normal use of the building
  • No noise and no vibration during installation


  • Strengthening or reinforcement of bearing structures made from reinforced concrete and masonry, against flexural (bending tensile) and axial stresses
  • Increasing strength and ductility of columns and walls
  • Increasing resistance against earthquakes
  • Increasing imposed loads
  • Replacement of corroded or missing reinforcement
  • In case of a change in the nature of imposed loads
  • Correction of design and/or building mistakes
  • Extension of service life and durability
  • Complying with the latest standards

Call to Action

Pin status

This page is not pinned. Pin this.


Contact person



Country specific Product Information

We provide country specific product information on our branches websites. See this product on:

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • DeliveryS&P G-Sheet E 50/50 (350 g/m²)S&P G-Sheet AR 50/50 (350 g/m²)
      Width of roll:670 mm670 mm
      Length of roll: 50 m50 m
      (special sheets upon request)
    • Storage
      Storage temperature between +5 °C and +35 °C. Store in a dry place and protect from direct sunlight.
    • Item number Article
      GSAR0505067S&P G-Sheet AR 50/50
      GSE0505067S&P G-Sheet E 50/50

Safety Data

  • For detailed safety information it is recommended to seek advice in the current safety data sheet.

Installation Instructions

  • Cut sheets with scissors or a knife and ruler. Never bend the sheets! (Sheet may only be folded parallel to the fibre). The S&P G-Sheets can be applied in a dry or wet lay-up process.

    For more details please refer to the application manual of G-Sheet E/AR.

You are here



    SIMPSON Strong-Tie

    Meta Navigation en-EU