Branch Indicator

  • You are here: S&P International

Languages

Products

Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P Tecnogrout-K

S&P Tecnogrout-K

TECNOGROUT-K is a non-shrinkage, thixotropic and sulphate resistant repair construction mortar (water vapour permeable).

Call to Action

Pin status

This page is not pinned. Pin this.

Description

S&P Tecnogrout-K is based on mineral products, is ready to use and can be applied by trowel or spatula for use in concrete repair, reinforcement, restoration and refurbishment.

Due to the product's high adherence, installation is possible onto any surface, e.g. concrete, ceramic, stone etc. Also, the water tight properties of the product protect the substrate from various forms of attack.

Features

  • Non-shrinkage (slight expansion)
  • Water-resistant
  • Unaffected by various atmosperic agents
  • Sulphate-resistant
  • Chloride free
  • Monolithic adherence to concrete
  • Stable against hydrocarbons and specific chemical compounds
  • Good chemical resistance to seawater, wastewater, sulphates
  • Allows vapour diffusion

Application

  • Reinforcement and repair of concrete structures
  • Filling of wall grooves and pigtails
  • Repairing of prefabricated elements: chips, honeycombs, cracks, etc.
  • Finishing of rough concrete surfaces
  • Rendering of fa├žades, swimming pools and basements
  • Setting of metallic plates
  • Roadways at water treatment plants
  • Repair of walls and exposed concrete
  • Renovation of pipelines and hydraulic works
  • Bridges, overpasses and dam spallings

Image Gallery

Call to Action

Pin status

This page is not pinned. Pin this.

Service

Contact person

Documentation

Country specific Product Information

We provide country specific product information on our branches websites. See this product on:

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Safety Data

  • For detailed safety information it is recommended to seek advice in the current safety data sheet.

Installation Instructions

  • Substrate preparation:
    Mechanically abrade concrete surface to completely remove debris and loose particles. Wet the surface until complete saturation is achieved and allow standing water to either evaporate or be absorbed into the substrate. Alternatively, remove standing water using a sponge.

    Mixing:
    Mix the grout either by hand or in a concrete mixer, adding 12-14 % of water (3-3.5 litres per 25 kg bag). Mix until completely lump-free, ensuring that a homogenous mix is achieved.

    Application:
    Apply the grout by means of trowel or spatula, or alternatively pouring the grout onto the concrete substrate. Finish the surface to the required roughness grade. In case a bonding agent is required, it is recommended to consult to our Technical department.

    Curing:
    Once the grout is installed, surfaces must be kept damp for at least 10-12 hours, in order to prevent superficial dehydration of the cement.

You are here

    Contact

    S&P

    SIMPSON Strong-Tie

    Meta Navigation en-EU