S&P FRP Systems
Structural reinforcement with fibre composites
Related System
S&P Resicem HP
S&P Resicem HP
Epoxy laminating resin with improved permeability
High performance, solvent-free, 3-component epoxy resin with formulated amine hardener. S&P Resicem HP improves vapour exchanges between the concrete member and the external environment. The product is enriched using special ingredients as well as additional fillers and additives.
Call to Action
Features
- Good wettability
- Good stability
- High performance
- Can be applied by machine
- Resistant to alkaline solutions, diluted acids, salt solutions, mineral oil and aliphatic hydrocarbons
Application
S&P Resicem HP is used as a laminating resin for the following S&P sheet systems:
- S&P C-Sheet
- S&P G-Sheets E / AR
- S&P A-Sheet
S&P Resicem is also suitable for corrosion protection of the existing internal rebars
Call to Action
Service
Contact person
S&P Clever Reinforcement Company AG Headquarters
S&P Clever Reinforcement Company AG Headquarters
- Phone
- +41 41 825 00 70
- info@sp-reinforcement.ch
- Location
Documentation
-
Technical Data Sheet S&P Resicem HP
-
Safety Data Sheet S&P Resicem, Component A
-
Safety Data Sheet S&P Resicem, Component B
-
Safety Data Sheet S&P Resicem HP, Component F
Country specific Product Information
We provide country specific product information on our branches websites. See this product on:
Data Area
Product Information
We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.
Logistic Data
-
Delivery Units of 10 kg or container of 1‘000 l Storage Component A + B: 24 months in original packaging at +5 °C to +35 °C Component F (powder): 12 months in original packaging at +5 °C to +35 °C Item number Article Packaging unit / weight Dimension SHRESICE010 S&P Resicem HP 1 Set = 11.100 kg H x Ø = 0.29 m x 0.25 m
Safety Data
-
For detailed safety information it is recommended to seek advice in the current safety data sheet.
Installation Instructions
-
Treatment
S&P Resicem HP is supplied in the required mixing proportions. The powder component (Comp. F) is added to the resin (Comp. A). Mixing of the components is ideally done using a low speed mixing device. When the hardener (Comp. B) is added, thorough stirring is again required. Proper mixing from the sides and from the bottom ensures that the hardener is evenly distributed throughout the container. The mixed product must be of homogeneous appearance, i.e. streak-free. The temperature of the components at the time of mixing should ideally be 15–20 °C. Higher temperatures reduce the application time considerably.
Products
S&P FRP Systems
Structural reinforcement with fibre composites
