Branch Indicator

  • You are here: S&P International

Languages

Related System

S&P Asphalt reinforcement

Fibre reinforcement grids for asphalt surfaces

S&P Carbophalt® G

S&P Carbophalt® G

Carbon/Glass fibre asphalt reinforcement grid

S&P Carbophalt® G is a pre-bituminised asphalt reinforcement grid made of carbon and glass fibres for local and/or complete surface reinforcement of bituminous surfaces.

S&P Carbophalt® G

Call to Action

Pin status

This page is not pinned. Pin this.

Features

  • Increases the load-bearing capacity
  • Measurable improvement of the structural value due to high tensile strength at small elongation
  • Minimises crack formation and prevents crack reflection
  • Reduces fatigue and thermal cracks
  • Grid structure freely moveable through heat application (no fixed knots)
  • Local application on existing cracks/joints or complete surface application
  • No waiting time - immediate road construction possible
  • Lower consumption of tack coat thanks to the pre-bituminised grid
  • Easy and efficient application with unrolling equipment (also in curves)
  • Effectiveness at a cover layer of min. 2 cm
  • Can be milled and recycled without problems

Application

  • Used against cracking
  • Prevents crack reflection
  • Increases the durability of asphalt surfaces
  • Increases the load bearing capacity of asphalt surfaces
  • The pre-bituminisation guarantees the required layer bonding between old and new road surfaces


 

Image Gallery

Call to Action

Pin status

This page is not pinned. Pin this.

Service

Contact person

Technical Data Sheets

Safety Data Sheets

Brochure

Country specific Product Information

We provide country specific product information on our branches websites. See this product on:

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • Delivery
      Width of roll0.97 / 1.50 / 1.95 m (further on request)
      Length of roll50 m
    • Item numberArticle Packaging unit / weightDimension
      CAG0097200S&P Carbophalt G (0.97 m)1 roll = 48.50 m² / 33.900 kg L x Ø = 1.00 m x 0.32 m
      1 pallet = 533.50 m² / 393.000 kg / 11 rollsL x B x H = 1.20 m x 0.80 m x 1.15 m
      CAG0150200S&P Carbophalt G (1.50 m)1 roll = 75.00 m² / 52.450 kg L x Ø = 1.50 m x 0.32 m
      1 pallet = 1'500.00 m² / 1'090.000 kg / 20 rollsL x B x H = 1.65 m x 1.05 m x 2.00 m
      CAG0195200S&P Carbophalt G (1.95 m)1 roll = 97.50 m² / 68.200 kg L x Ø = 1.95 m x 0.32 m
      1 pallet = 1'950.00 m² / 1'405.000 kg / 20 rollsL x B x H = 2.00 m x 1.05 m x 2.00 m

Application Instructions

  • - Clean substrate free of dust and grease
    - Apply polymer modified emulsion on dry surface
    - Apply S&P Carbophalt® G on dry surface by machine or manually, if possible immediately before pavement construction.
    - Apply at temperatures > 3 °C. The minimum temperatures cf. SN 640 430b apply for application of layers.
    - Observe overlapping lengths of 10 to 20 cm
    - Overlapping of reinforcement should be optimised according to the nature and location of joints and cracks, as well as wheel loading.
    - If the S&P grid is applied only on local areas, it must be covered manually with bituminous mixture. This prevents the cracking caused by passing vehicles.
    - Minimum cover layer thickness of 2 cm on top of S&P Carbophalt® G

You are here

    Contact

    Legal info

    Legal info

    • About Simpson Strong-Tie®

      Since 2012 S&P has been part of Simpson Strong-Tie, an international building products company based in California with multiple locations across Europe.

      The company is committed to helping customers succeed by providing exceptional code-listed products, full-service engineering and field support, product testing and training, and on-time product delivery.

    SIMPSON Strong-Tie

    Meta Navigation en-EU