Links: Mobile Menu v1

Languages

S&P C-Sheet 240

Sheets

S&P C-Sheet 240

S&P C-Sheet 240 is a unidirectional carbon fibre fabric with high strength for structural reinforcement. Can be applied in a dry or wet process.

S&P C-Sheets are applied (stuck on) to the building element in question using the laminating resin (S&P Resin 55 HP or S&P Resicem HP).

Field of application

Strengthening or reinforcement of bearing structures made from reinforced concrete, masonry, and timber, for axial, shear, and bending tensile stresses.

  • Increasing strength and ductility of columns
  • Increasing axial load by "wrapping" columns
  • Increasing imposed loads
  • Replacement of corroded or missing reinforcement
  • In case of a change in the nature of imposed loads
  • Correcting of design and/or building mistakes
  • Increasing resistance to an earthquake
  • Extension of service life and durability
  • Complying with the latest standards

 

Applikation S&P C-Sheet 240
Applikation S&P C-Sheet 240
Applikation S&P C-Sheet 240

Advantages

  • Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Available in a variety of widths and thicknesses
  • Low self-weight and a small application thickness
  • Simple, flexible and economic strengthening method
  • No corrosion
  • Very short interruption of normal use of the relevant building or infrastructure
  • No noise and no vibration during installation

Related Software

FRP Colonna

FRP Colonna is a design software for reinforcement of centrally loaded concrete columns by wrapping S&P FRP Sheets. FRP Colonna may be used for preliminary and final design of structural reinforcement. For a known axial force, the software calculates the required layers wrapping with S&P Aramid-, Carbon-, or Glass Sheet.

FRP Colonna does not check buckling.

FRP Lamella

FRP Lamella is a design software for flexural and/ or shear reinforcement with S&P FRP systems. FRP Lamella may be used for preliminary and final design of structural reinforcement. For known bending moments and shear forces, the software calculates the required S&P C-Laminate and/ or S&P FRP Sheet.

Documentation and Literature

Technical Data Sheet S&P C-Sheet 240
Safety Data Sheet S&P C-Sheet 240
Basics for S&P FRP-Systems

Tab Group

Logistic Data

DeliveryS&P C-Sheet 240 (200 g/m²)S&P C-Sheet 240 (300 g/m²)S&P C-Sheet 240 (400 g/m²)S&P C-Sheet 240 (600 g/m²)
Width of roll:300 or 600 mm300 or 600 mm300 or 600 mm300 mm
Length of roll:100 m100 m100 m100 m
(special sheets upon request)
Storage
Storage temperature between +5 °C and +35 °C. Store in a dry place and protect fro direct sunlight.
Item numberArticlePackaging unit / weightDimension
CS240200300S&P C-Sheet 240 200 g/m²1 roll = 30.00 m² / 8.35 kgH x Ø = 0.32 m x 0.25 m
(roll of 300 mm x 100 m)
CS240200600S&P C-Sheet 240 200 g/m²1 roll = 60.00 m² / 17.00 kgH x Ø = 0.64 m x 0.27 m
(roll of 600 mm x 100 m)
CS240300300S&P C-Sheet 240 300 g/m²1 roll = 30.00 m² / 11.40 kgH x Ø = 0.32 m x 0.26 m
(roll of 300 mm x 100 m)
CS240300600S&P C-Sheet 240 300 g/m²1 roll = 60.00 m² / 22.20 kgH x Ø = 0.64 m x 0.28 m
(roll of 600 mm x 100 m)
CS240400300S&P C-Sheet 240 400 g/m² 1 roll = 30.00 m² / 14.30 kgH x Ø = 0.32 x 0.30 m
(roll of 300 mm x 100 m)
CS240400600S&P C-Sheet 240 400 g/m²1 roll = 60.00 m² / 28.00 kgH x Ø = 0.64 m x 0.30 m
(roll of 600 mm x 100 m)
CS240600300S&P C-Sheet 240 600 g/m² 1 roll = 30.00 m² / 20.65 kg H x Ø = 0.32 m x 0.33 m
(roll of 300 mm x 100 m)

Safety Data

For detailed safety information it is recommended to seek advice in the current safety data sheet.

Installation Instructions

Treatment

Cut sheets with scissors or a knife and ruler. Never bend the sheet in the longitudinal direction! (sheet may only be folded parallel to the fibre. The S&P C-Sheet 240 can be applied in a dry or wet “lay-up” process.

For details please refer to the application manual for S&P C-Sheet 240.

Meta Navigation en-CH

Contact

Region

S&P